Exploring the 360o Panoramic in the Printmaking Studio through Virtual Tours

Authors

  • Mohd Nafis Saad Program Seni Halus, Kolej Pengajian Seni Kreatif, Universiti Teknologi MARA, Cawangan Perak, Malaysia
  • Ruzamira Abdul Razak Program Seni Halus, Kolej Pengajian Seni Kreatif, Universiti Teknologi MARA, Cawangan Perak, Malaysia
  • Muhammad Salehuddin Zakaria Program Seni Halus, Kolej Pengajian Seni Kreatif, Universiti Teknologi MARA, Cawangan Perak, Malaysia
  • Siti Humaini Said Ahmad @ Syed Ahmad Program Seni Halus, Kolej Pengajian Seni Kreatif, Universiti Teknologi MARA, Cawangan Perak, Malaysia
  • Hairulnisak Merman Program Seni Halus, Kolej Pengajian Seni Kreatif, Universiti Teknologi MARA, Cawangan Perak, Malaysia

DOI:

https://doi.org/10.37134/kupasseni.vol11.3.1.2023

Keywords:

Exploring, Panoramic, Printmaking, Studio, Virtual Tours

Abstract

The printmaking in Malaysia encompasses various techniques, including relief print, intaglio print, screen printing and lithography. The technique of the printmaking artwork is conventional. According to the research produced, this focuses on the introduction of materials and equipment in printmaking through a 360 panoramic exploration of the printmaking studio through virtual tours. The objective of this research is to clearly understand the material and equipment information available in the printmaking studio. The method used in this research is through the development process using Pano2VR as well as the multimedia development model. The results of this study found that clearly obtained information about the materials and equipment available in the printmaking studio, knowing about the use of the machine more regularly, Meanwhile, the rules displayed through the virtual tour method are clearer. However, virtual tours offer benefits but cannot replace real experiences. Technology's continuous development makes them increasingly important in modern life, but they cannot replace real experiences.

Downloads

Download data is not yet available.

References

Aziz, M. A., & Agustian, B. (2023). Pengenalan Lingkungan Kampus Universitas Pamulang Secara Interactive Menggunakan Virtual Tour (VR) Berbasis Website. OKTAL: Jurnal Ilmu Komputer dan Sains, 2(08), 2122-2129.

Cao, K. (2022). Development and Design Case Function Comparison of Panoramic Roaming System of Virtual Museum Based on Pano2VR. Mobile Information Systems, 2022.

Chiao, H. M., Chen, Y. L., & Huang, W. H. (2018). Examining the usability of an online virtual tour-guiding platform for cultural tourism education. Journal of Hospitality, Leisure, Sport & Tourism Education, 23, 29-38.

Daniela, L. (2020). Virtual museums as learning agents. Sustainability, 12(7), 2698.

Dutta, P., & Bhowmik, R. (2023, January). The Digital Technology Integration in Fine Arts: A Qualitative Study of Printmaking Practice in the Indian Art Education Scenario. In International Conference on Research into Design (pp. 885-898). Singapore: Springer Nature Singapore.

El-Said, O., & Aziz, H. (2022). Virtual tours a means to an end: An analysis of virtual tours’ role in tourism recovery post COVID-19. Journal of Travel Research, 61(3), 528-548

Izwanna, N., Legino, R., Jebakumari, & Mohd Salleh, N. (2020). An Element of Culture on Printmaking Artworks. Environment-Behaviour Proceedings Journal, 5(SI1), 107–110. https://doi.org/10.21834/ebpj.v5iSI1.2306

Jubaedi, A. D., & Dwiyatno, S. (2020). Implementasi Teknologi Virtual tour pada Museum. JSiI (Jurnal Sistem Informasi), 7(2), 70-77.

Liu, Q., Chen, H., & Crabbe, M. (2021). Interactive study of multimedia and virtual technology in art education.

International Journal of Emerging Technologies in Learning (iJET), 16(1), 80-93.

Martin, J. (2018). Encyclopedia of Printmaking Techniques. Search Press Limited.

Mat Isa, M. J. (2022). Factors which Influenced the Style of Malaysian Printmaking: 1930-2000. Environment-Behaviour Proceedings Journal, 7(SI9), 197–202. https://doi.org/10.21834/ebpj.v7iSI9.3939

Muhamad, N., Tahir, A., Ramli, I., S Abu Bakar, S. A., Desa, N. E., Mohd Aripin, N. A. N., & Arshad, M. F. (2023). The visual representation of Malaysian cultural identity in 1950s printmaking artworks/Noor A’yunni Muhamad et al. Idealogy Journal, 8(1), 203-222.

Rani, A. (2018). Digital Technology: It's Role in Art Creativity. Journal of Commerce and Trade, 13(2), 61-65.

Reyna, J. (2018). The potential of 360-degree videos for teaching, learning and research. In INTED2018 proceedings (pp. 1448-1454). IATED.

Susilo, A., & Hardyanto, Wahyu., & Martuti, N., & Purwinarko, Aji. (2021). Mobile learning development using augmented reality as a biology learning media. Journal of Physics: Conference Series. 1918. 042013. 10.1088/1742-6596/1918/4/042013.

Downloads

Published

2023-10-10

How to Cite

Saad, M. N., Abdul Razak, R., Zakaria, M. S., Said Ahmad @ Syed Ahmad, S. H., & Merman, H. (2023). Exploring the 360o Panoramic in the Printmaking Studio through Virtual Tours . KUPAS SENI: Jurnal Seni Dan Pendidikan Seni, 11(3), 1–7. https://doi.org/10.37134/kupasseni.vol11.3.1.2023

Most read articles by the same author(s)

1 2 > >>