Harmonising Traditional and Technology: 3D Printing’s Role in Modernising Rebab Melayu
DOI:
https://doi.org/10.37134/juraisembah.vol5.1.3.2024Keywords:
Rebab Melayu, 3D Printing, Traditional Craftsmanship, Cultural Preservation, ModernisationAbstract
The Rebab Melayu, a traditional string instrument deeply rooted in Malay culture, symbolizes the rich cultural heritage of Southeast Asia. However, the continuity of this iconic instrument is increasingly threatened by the decline in skilled craftsmanship and the rising costs associated with traditional manufacturing techniques. This study investigates the potential of 3D printing technology as a modern solution to these challenges. By integrating 3D printing with traditional craftsmanship, the research aims to preserve the cultural essence of the Rebab Melayu while enhancing production efficiency in terms of cost, time, and space. The study also explores whether 3D printing can replicate the intricate design that defines the Rebab Melayu. Through a comparative analysis of traditional and 3D-printed Rebab Melayu, this research highlights the potential of 3D printing to revitalize interest in the instrument, particularly among younger generations. The findings suggest that a balanced approach, combining modern technology with traditional methods, can ensure the continued relevance and preservation of the Rebab Melayu as a vital part of Malay cultural heritage.
Downloads
References
Aabid, A., Amir, A., & Baig, M. (2023). Advancements and limitations in 3d printing materials and technologies: A critical review. Polymers, 15(11).
Abd. Latif, A. (2010). Identiti rebab di alam Melayu. Retrieved from https://www.scribd.com/doc/39638983/Identiti-Rebab-Di-Dalam-Melayu.
Cottrell, S., & Howell, J. (2019). Reproducing musical instrument components from manufacturers’ technical drawings using 3D printing: Boosey & Hawkes as a case study, Journal of New Music Research, (48)5, 449-457, https://doi.org/10.1080/09298215.2019.1642362
Dabin, M., Narushima, T., Beirne, S.T., Ritz, C.H. & Grady, K. (2016). 3D modelling and printing of microtonal flutes, Proceedings of the 16th International Conference on New Interfaces for Musical Expression (NIME 2016), Queensland Conservatorium Griffith University, Brisbane, pp. 286-290.
Damodaran, A., Sugavaneswaran, M., & Lessard, L. (2021). An overview of additive manufacturing technologies for musical wind instruments. SN Applied Sciences, 3, 1-12.
Hsueh, M. H., Lai, C. J., Wang, S. H., Zeng, Y. S., Hsieh, C. H., Pan, C. Y., & Huang, W. C. (2021). Effect of printing parameters on the thermal and mechanical properties of 3d-printed pla and petg, using fused deposition modeling. Polymers, 13(11), 1758.
Iancu, C., Iancu, D., & Stăncioiu, A. (2010). From CAD model to 3D print via” STL” file format. Fiability & Durability/Fiabilitate si Durabilitate, (1).
Jusoh, C. M. (2011). Lampiran I-Rebab Makyung. In R. Z. S. U. RS (Ed.), Makyung warisan mistik Malaysia. Institut Terjemahan Negara Malaysia Berhad.
Jusoh, C. M., & Bidin, M. O. (2017). Permainan dan pembuatan rebab dalam persembahan tradisional Melayu. In Nazarudin, Z., Bidin, M. O. (Eds.). Dinamisme etnik dan sosiobudaya Melayu. Penerbit USM.
Kantaros, A., & Diegel, O. (2018). 3D printing technology in musical instrument research: Reviewing the potential. Rapid Prototyping Journal, 24(9), 1511-1523.
Kechot, A.S., Daeng Jamal, D. H., Abdullah, H., & Nawi, M. Z. (2015). Pembuatan alat musik rebab Melayu. In Mariyam, J. G. (Ed.), Ensiklopedia Alam Melayu (323). Aras Mega.
Kim, J. T. (2016). Combining 3D printing with traditional crafts: Why is it needed and what is the role of the designer (Masters thesis, Ulsan National Institute of Science and Technology).
Magnusson, T. (2021). The migration of musical instruments: On the socio-technological conditions of musical evolution. Journal of New Music Research, 50(2), 176-183. https://doi.org/10.1080/09298215.2021.1907420
Mat Zain, Z. (2015). Pengenalan asas rebab Kelantan (Doctoral dissertation, Universiti Pendidikan Sultan Idris).
Matusky, P., & Tan, S. B. (2017). The music of Malaysia: The classical, folk, and syncretic traditions (2nd ed.). Taylor and Francis.
Maurya, N. K., Rastogi, V., & Singh, P. (2019). Experimental and computational investigation on mechanical properties of reinforced additive manufactured component. http://dx.doi.org/10.5109/2349296
Nasuruddin, G, M. (2018). Traditional anthropological performance healing in Malaysia. Universiti Putra Malaysia Press.
Nik Salleh, N. M. (1995). Alat musik tradisional dalam masyarakat Melayu di Malaysia. Perpustakaan Negara Malaysia Data Pengkatalogan dalam Penerbitan.
Pedgley, O., Norman, E., Armstrong, R. (2009). Materials-Inspired innovation for acoustic guitar design. METU Journal of the Faculty of Architecture, 26(1), 157-175.
Savan, J., & Simian, R. (2014). CAD modelling and 3D printing for musical instrument research: The cornett case study. Early Music. 42(4).
Simian, R. (2023). 3D-Printed musical instruments: Lessons learned from five case studies. Music and Science, 6, 1-16. https://doi.org/10.1177/20592043231210653
Zoran, A. (2011). The 3D printed flute: Digital fabrication and design of musical instruments. Journal of New Music Research. 40(4). 379-387.
Zvoníček, T., Vašina, M., Pata, V., & Smolka, P. (2023). Three-Dimensional printing process for musical instruments: Sound reflection properties of polymeric materials for enhanced acoustical performance. Polymers, 15(9), 2025.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Mhd Sany Mhd Hanif, Mohammad Kamal Sabran, Hasnul Azwan Azizan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
